Simpler Networks HP200PT64 Instrukcja Użytkownika Pobierz pdf (Strona 22)

NETWORK STATUS

This section shows the current IP configuration.

Field

Description

IP Configuration

Either DHCP (Automated) or Fixed (Manual)

IP Address /

Subnet Mask

These values define the location of the PowerGrid unit on the

local area network.

Default Gateway

IP Address

The IP address of the router that forwards traffic to a

destination that is out of reach of the PowerGrid unit.

DNS server

IP Address

The IP address of the server that provides Domain Name

System (DNS) services such as hostname IP lookup.

PHY STATUS

This section summarizes the physical parameters of the network.

Field

Description

Notches

Radio-frequency (RF) interference reduction.

Power Control

This function minimizes the transmission power of each

PowerGrid unit while maintaining data throughput performance.

*Dynamic PSD

Control

The modem’s Ethernet port monitors the incoming traffic rate

and subsequently calculates the transmission power required

that permits this rate of transmission.

The higher the incoming traffic rate, the greater the phy rate

and transmission power required. The lower the rate, the lesser

the phy rate and transmission power required.

* This feature has been developed to reduce the transmission power so as to

cut the power consumption of the device and minimize the interference to

other electronic devices in the vicinity.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 40 41

Brak uwag

Simpler Networks HP200PT64 Instrukcja Użytkownika Strona 22